본문 바로가기
카테고리 없음

Ntfs Driver For Mac Free Download

rompliliala1982 2020. 12. 2. 16:18


By Nathan E. Malpass, Last updated: September 14, 2019

Ntfs Driver For Mac Free Download

Mac operating systems can read NTFS drives formatted on Windows. However, they don’t have the ability to write to them directly. In this article, we’ll give you both free and paid methods of getting total read/write access to that of NTFS drives.

This guide can be helpful when you wish to write to a Boot Camp partition within your Mac as partitions for the Windows system must utilize NTFS. If you need something for external drives, it is recommended that you use exFAT instead of NFTS. macOS can directly read and write to drives using exFAT like Windows do.

Grant Full Read-Write Access to NTFS Drives on Mac By default, macOS Disk Utility can mount NTFS drive in read-only mode, so you cannot write to NTFS-formatted drive from your Mac. Microsoft NTFS for Mac by iBoysoft can mount NTFS drive in read-write mode and enables NTFS file system read-write compatibility on your Mac, try free for 7 days. Tuxera NTFS 2019 - NTFS driver developed from the popular open-source NTFS-3G driver. Download the latest versions of the best Mac apps at safe and trusted MacUpdate. Before choosing an NTFS driver for Mac, I think you should consider the following: 1. The speed of the driver - will impact the file transfer rate. You don’t want to sit and stare at the files being transferred for hours. Stability - you don’t. NTFS for Mac OS X is a software that allows detecting an NTFS storage device with a Mac OS. It is possible to modify, erase all stored data in this volume. With high performance of the Mac system, NTFS for Mac OS X offers the same transfer rate as the native format of Mac OS. The user can then extract any stored data in his NTFS drive and copy it to another emplacement.

Three Options to Consider When Writing to NTFS Drives on Your Mac

There are multiple options you should consider when writing to NTFS drives using your Mac device. We will dig into these options later on. Take note that with some options, we’ll give you more than one method of doing it.

Third-Party Drivers (Paid)

Third-party NTFS drivers can be used on your Mac device. Usually, you need to install these drivers and they work perfectly. These paid solutions can be installed easily. Plus, they have better performance relative to free options.

Third-Party NTFS Drivers (Free)

Ntfs For Mac For Free

To allow Mac support for writing to NTFS drives, you can opt for free, open-source drivers. They can be difficult to install compared to the paid versions. This is because of Mac’s System Integrity Protection feature. Free drivers are slower compared to paid versions. Plus mounting NTFS partitions automatically in read-write mode can be a threat to your security.

Experimental Apple Support For NTFS-Write

The operating system of Mac offers you experimental support for writing to that of NTFS drives. By default, this support is deactivated. You have to dig into the Terminal to activate it.

Using this method is not guaranteed. Plus, you can even mess around with your NTFS file system and cause issues. Some people who’ve tried it resulted in corrupt data. Thus, it is not recommended to use this method. There’s a reason for it being deactivated by default.

It is recommended that you purchase a third-party driver to write to NTFS drives on Mac as other solutions might be very tedious or dangerous.

Best Paid Third-Party NTFS for Mac: FoneDog’s PowerMyMac

FoneDog’s PowerMyMac is a multifunction tool that allows you to perform a variety of activities on your Mac. Aside from being able to clean your Mac of junk, it can also help youwrite files to NTFS drivesusing your beloved Apple computer.

Below are the steps on how to use this tool to write to NTFS drives on Mac:

Step 01: Download, install and launch PowerMyMac on your computer and select Toolkit.

Step 02: Select NTFS.

Step 03: Press the Write button in order to copy, delete, edit, or perform other instructions on your files from Windows-formatted SDD, HDD, or flash drive.

It is important to remember that when a pop-up window labeled “Fail” is displayed on your screen, it is because you still have to install Osxfuse and NTFS – 3g on your Mac device. This is a prerequisite to using the NTFS tool.

Step 04: Now, you will be able to see USB information located on the left side of the screen. The right column lists the USB’s files and folders. You have to drag the file(s) you wish from the USB to the blank location on the interface.

Step 05: Press the button labeled Write. Now, the files you have dragged into the blank space will be transferred to your USB. Once a message pops up saying the process is complete, then writing to NTFS drives is now done.

Step 06: Unmount the USB drive from your Mac computer.

Now, that’s an easy way of writing to NTFS drives using your Mac. PowerMyMac by FoneDog is our top option as it’s the easiest to use. Let’s get into another paid driver before delving into the free methods for writing to NTFS drives.

Runner-Up Paid Third-Party NTFS Driver: Paragon NTFS for Mac

This tool can be purchased for USD 19.95 and provides you with a free trial for 10 days. It will easily and cleanly install on most recent versions of the Mac OS. For instance, it can be installed on Mac OS X El Capitan version 10.11 and macOS Sierra version 10.12.

It really works and does its job. Thus, it’s our second choice if you’re willing to shell out a small amount of cash to get its feature. With Paragon, you don’t need to fuss about terminal commands just to mount partitions manually, automatically do an insecure mount partition, or handle possible corruption as you might experience with free drivers shown below.

If you really need to write to NTFS drives on a Mac, it is best to pay for the software we have mentioned in this article. We are stressing out that it will definitely be worth it. Also, if you bought a Seagate drive, you can actually have a free download of Paragon NTFS for Mac. Thus, you don’t have to buy anything extra as Seagate offers it for free.

Another option would be Tuxera NTFS for Mac. This tool costs USD 31.00. Plus, they can give you a free trial for 14 days. However, PowerMyMac and Paragon do the same things for more features or cheaper costs.

How to Write to NTFS Drives for Mac For Free: Using FUSE for macOS

This is a free method that requires a bit of effort. Plus, it is less secure. To make your Mac device mount NTFS partitions automatically within a read-write mode, you have to deactivate System Integrity Protection temporarily. Plus, you also need to replace an Apple tool built into the system with a binary. This binary is highly vulnerable to malicious attacks. Thus, doing this is a risk to your security.

But, you can also use FUSE in order to “manually” mount NTF partitions within a read-write mode. This is the case if you’re willing to use the Terminal. This is more secure compared to the one above. However, it requires more work.

The first thing to do is to go to FUSE for macOS website and download it. After then, install the tool on your Mac. During the installation process, select the default options. Then, you’ll also need the command line developer tools of Apple. You can install this by going to Finder and then visiting Applications. After which, select Utilities and launch the Terminal window. In the said window, type the following command:

After this, click Install to begin the installation process.

In addition to the first two installations, you’ll also need to download homebrew if it isn’t in your Mac yet. This is a package manager designed for Mac OS X. Use the Terminal window again to install this package manager. Just type in the following command and then press Enter to start installing it:

After this, press Enter. If it asks for authentication, then type in your password. The script will download and then install Homebrew automatically on your Mac device. Once Homebrew and developer tools are installed using the Terminal window and run the following again in order to install Ntfs-3g:

Now, you can mount NTFS partitions within reading or write mode manually. Run the command below using a Terminal window. In this way, you will create a mount point located at /Volumes/NTFS. This will be done once only.

Once you connect your NTFS drive to the Mac computer, run the command below using Terminal in order to list the disk partitions:

Now, you will be able to determine the device name of your NTFS partition. You simply have to look for the said partition that has the Windows NTFS file system. It is probable that your Mac device has already mounted the NTFS partition automatically. Thus, you have to unmount it before doing anything else.

Run the command below. Replace the /dev/disk3s1 with the actual name of your NTFS partition device. Bone thugs album downloads.

After unmounting it, you should mount the drive again. To do this, run the command below. Similar to the one above, you should replace /dev/disk3s1 with the NTFS partition device name.

By now, you’ll notice that the file system will be mounted at the location /Volumes/NTFS. It will also be displayed on your desktop as a regular mounted drive. If you wish to unplug the drive, you can eject it through the usual method of doing so.

If you think the above method works for you, then you don’t have to continue reading. However, if you want to use another free method, then read on.

If you want your Mac device to mount NTFS drives automatically within reading or write mode, you have to deactivate System Integrity Protection.

A Word Of Caution

You might not want to perform this method. The official instructions of the software state that this is a risk to your device’ security. When you do this, you will replace your Mac’s NTFS mount tools with that of the NTFS-3g tools. This will run like that of the root user. Because of the actual way Homebrew installs software on your device, the malware within your Mac can overwrite the said tools. It’s not worth it. However, we’ll still explain how to implement this method if you are willing to take risks.

First, you have to reboot your Mac device. Once you are doing so, press and hold the keys Command + R. It will display the recovery mode environment. Go to the utility menu within recovery mode and open the Terminal. Run the command below:

After this, reboot the Mac device again normally. From the desktop, launch Terminal again. Run the commands below in order for NTFS-3g to function:

Finally, reactivate System Integrity Protection. To do this, you simply reboot the Mac, press, and hold the keys Command + R. In this way, your recovery mode will be launched. Open the Terminal within recovery mode and run the command below:

Then, reboot your Mac computer once again. By now, the support for writing to your NTFS drive should be functioning.

In order to undo all changes you have made and also uninstall everything, you have to deactivate System Integrity Protection first. After doing this, run the commands below:

Then, you can simply uninstall FUSE by going to its panel within System Preferences. After this, you should reactivate System Integrity Protection. By now, you’ve realized why we recommend using PowerMyMac’s NTFS tool instead.

Experimental Support for NTFS-Writing by Apple(Free)

This method is the least tested. That’s why we seriously don’t recommend you to do it. We’ve warned you. So, do not put the blame on us or even on Apple especially if you run into issues in the future. This method is unstable and it might never be. The method is just included here for educational purposes.

First, you have to make sure that the drive has a label that uses a single word only. This is for convenience. If it has two words or more, then change it. This will ensure that the process becomes easier.

Visit Finder and then go to Applications. Then, go to Utilities and open Terminal. Type the command below using the Terminal. In this way, the /etc/fstab file will be opened. The said file will be used to edit within a nano text editor.

Ntfs Driver For Mac Free Download

The line below should be added to nano. Replace the word “DEVICENAME” with your NTFS drive’s label:

Once you’re finished, press the keys Control + O in order to save the said file. After this, press Control + X to exit nano. If you wish to write to more than one NTFS drive, simply add another line for each one.

Now, you should connect the NTFS drive to your computer. If it is already connected, just unplug it and plug it back again. You should be able to see it within the directory “/Volumes.” To do this, use a Finder window and press Go. After this, click Go To Folder. Type out “/Volume” within the box to gain access to it. Typically, it will not be automatically displayed within Desktop like that of normal drives.

Later, you can simply undo the change you’ve made. Simply repeat the process above to launch the /etc/fstab file within nano. The line, you’ve placed in the file? Just delete it and save the new changes.

In Conclusion

This guide is here to help you learn how to write to NTFS drives on Mac. Both free and paid methods were outlined here. It is recommended that you opt for the paid methods (e.g., PowerMyMac) in order to get this feature. In this way, you don’t have to risk the performance of your Mac and even potentially face file corruption.

>Tricks >How To Write To NTFS Drives For Mac: Free And Paid Methods
Comment ()
By Juno | Posted to NTFS for Mac Tips, updated on May 29, 2020

Before you are led to the introduction of free NTFS for Mac, here is some background information in case you don't know.

You can read Windows NTFS drives on Mac. But Mac can't write to NTFS drives, including create, edit, copy, paste, delete, or transfer files on NTFS drive on Mac desktops and laptops. Do you know why?

NTFS is a file system developed by Microsoft, the competitor of Apple. NTFS is used by default on Windows platform, especially for system drive. Additionally, if you use Boot Camp to create a Windows partition on your Mac, you will find you can't mount BOOTCAMP partition with read-write access either. Up to now, Mac operating systems, including macOS Catalina/Mojave/High Sierra/Sierra and Mac OS X El Capitan, only provide NTFS read support but deny NTFS write support.

You know the business, but for users, is there any way to let Mac write NTFS drives? Can you make the NTFS drive fully compatible with macOS or Mac OS X? Sure. The easiest method is to use NTFS driver for macOS software.

If you are looking for a totally free NTFS for Mac software, there are four options: Mounty for NTFS, NTFS-3G, FUSE for macOS and SL-NTFS.

Top 4 NTFS for Mac free software

Some Mac users may have upgraded to macOS Catalina and are digging around for an NTFS driver for macOS 10.15. But it's hard to find a Free NTFS for Mac that supports macOS 10.15 yet. Fortunately, iBoysoft has upgraded their software iBoysoft NTFS for Mac to be compatible with macOS Catalina.

If you are using a Mac running macOS 10.14 and earlier, you can try the NTFS for Mac below and share NTFS drives between Windows and Mac.

1. Mounty for NTFS

Mounty for NTFS is completely NTFS for Mac free software to enable write ability to NTFS drives on your Mac. It has simple design to help users mount NTFS drives with write support on Mac.

As a free utility, Mounty for NTFS does have some highlights:

  1. Totally free.
  2. Fast download and installation because it is less than 1MB.
  3. One-time installation and no additional driver needed.

But Mounty for NTFS dose get complaints because:

  1. The write speed to NTFS drive is rather slow.
  2. It can't mount the NTFS formatted drives in read-write mode automatically.
  3. It can be unstable and fails to mount NTFS drives.
  4. It can cause data loss problems.
  5. It doesn't provide tech support.
  6. The software is not compatible with the latest macOS Catalina or Mojave.

2. NTFS-3G

NTFS-3G is an open-source project from Tuxera, so the public can download this NTFS for Mac free software to write to Windows NTFS drives on your Mac computers

Set aside its advantage for being free, NTFS-3G is complained a lot because of its poor performance. Some main drawbacks of this free NTFS for Mac are listed below:

  1. Complicated installation. You have to know how to use Terminal or have already downloaded FUSE for macOS, Homebrew or Xcode.
  2. Poor usability. Users have to use the software by command lines in Terminal instead of an interface.
  3. Poor compatibility. NTFS-3G only supports macOS 10.12 or earlier. It doesn't support the latest macOS 10.15 and macOS 10.14.
  4. Slow write speed. The file transferring is noticeably slow.
  5. Tuxera stops maintaining this utility.
  6. No technical support. As freeware, no technical support is available when issues occur.

3. FUSE for macOS

FUSE for macOS (was OSXFUSE) is another open and NTFS for Mac free software that can enable write support to NTFS drives on Mac. In fact, FUSE is a file system extension that allows user to read and write disks with the formats that are not fully supported by Apple.

FUSE for macOS is worth trying because:

  1. It is free of charge.
  2. It is compatible with Mac operating system from Mac OS X 10.6 to macOS 10.14.
  3. Multiple languages are available.

As a free NTFS for Mac, FUSE for macOS has some obvious limitations:

  1. It can be unreliable sometimes such as file size being reported as 0 bytes.
  2. It has no technical support when issues occur.

4. SL-NTFS

SL-NTFS means Snow Leopard NTFS. As a matter of fact, writing to NTFS drive on Apple is possible since Mac OS 10.6 without any third-party NTFS driver, but the NTFS writing support is disabled by default. Therefore, SL-NTFS is used as an interface on the Apple NTFS driver to enable writing to NTFS drives on Mac.

As a NTFS for Mac free app, SL-NTFS has some pros as followings:

  1. It is free.
  2. It is simple to install.

However, SL-NTFS has some cons to prevent people from using it.

  1. It has limited access to a large number of files and a large volume of data.
  2. It can't enable NTFS write on some NTFS external hard drives.
  3. It can cause conflicts if you have another NTFS enabler installed.
  4. It has no technical support.

Generally speaking, despite of being free, those NTFS for Mac free software have various flaws, making them very risky to use.

Toshiba Ntfs Driver For Mac

If you are afraid of using a risky free NTFS utility for Mac, there are two cost-effective alternatives for you. Even though they are not completely free, they can provide a lot of merits that NTFS for Mac free software on't have.

Best NTFS for Mac software

Ntfs Driver Download

NTFS for Mac free software can be troublemakers because of their low write speed, poor compatibility, no technical support, etc. Nevertheless, you don't have to pay a fortune to get enough reliability, stability and simplicity from a cost-effective NTFS for Mac - iBoysoft NTFS for Mac or iBoysoft Drive Manager.

1. iBoysoft NTFS for Mac

iBoysoft NTFS for Mac is an ultimate NTFS for Mac solution in macOS and Mac OS X that can easily help you mount NTFS volumes on Mac desktops and laptops as regular drives in read-write mode.

iBoysoft NTFS for Mac has quite a few advantages you can take into account:

  1. It can mount NTFS volumes in read-write mode automatically.
  2. It can unmount and eject NTFS volumes with one click.
  3. It can repair NTFS file system errors.
  4. It can erase NTFS volumes for data cleanup.
  5. It can reformat other file system (except APFS) into NTFS.
  6. It is fully compatible with macOS 10.15/10.14/10.13/10.12 and Mac OS X 10.11/10.10/10.9/10.8.
  7. It is easy to install and use.
  8. Free technical support is provided.

2. iBoysoft Drive Manager

Another great alternative to NTFS for Mac free software is iBoysoft Drive Manager. It is a handy Mac tool that can enable full read-write access to NTFS drives on Mac and help manage multiple external drives/network drives with one click.

iBoysoft Drive Manager is a great replacement of a free NTFS for Mac because:

  1. It is extremely affordable and offers 7-day free trial.
  2. It is fully compatible with macOS 10.15/10.14/10.13/10.12 and Mac OS X 10.11/10.10/10.9/10.8.
  3. It is fast to write to NTFS drives and transfer files between NTFS drives and Mac.
  4. It is easy to install and use.
  5. It provides lifetime free upgrades.
  6. Free technical support is provided.
  7. Besides powerful NTFS writing support, it can manage external drives and map network drives as local drives in the Finder.

If you want to know any disadvantages that iBoysoft Drive Manager might have, I would say the only one should be - it is not free. But it is really cheap compared with other commercial NTFS for Mac programs, such as Paragon and Tuxera.

We also provide a table to help you find the most preferable NTFS driver:

NTFS for macOSiBoysoft Drive ManageriBoysoft NTFS for MacMounty for MacNTFS-3GFUSE for macOSSL-NTFS
NTFS writingYesYesYesYesYesYes
Auto-mount NTFS in read-write mode YesYesNoNoYesYes
SpeedFastFastSlowSlowSlowSlow
Supported Mac OSmacOS 10.15/10.14/10.13/10.12 and Mac OS X 10.11 to 10.8.macOS 10.15/10.14/10.13/10.12 and Mac OS X 10.11 to 10.8.macOS 10.13/10.12 and Mac OS X 10.11 to 10.6.macOS 10.13/10.12 and Mac OS X 10.11 to 10.6.macOS 10.14/10.13/10.12 and Mac OS X 10.11 to 10.6.macOS 10.12 and Mac OS X 10.11 to 10.6.
Supported devicesUSB drives, SD cards, HDDs, etc.USB drives, SD cards, HDDs, etc.USB drives, SD cards, HDDs, etc. (not all)USB drives, SD cards, HDDs, etc.USB drives, SD cards, HDDs, etc.USB drives, SD cards, HDDs, etc. (not all)
Supported file systemNTFS, APFS, FAT32, exFAT, etc.NTFS, APFS, FAT32, exFAT, etc.NTFSNTFSNTFS, APFS, FAT32, exFAT, etc.NTFS
Tech supportYesYesNoNoNoNo
Simple installationYesYesYesNoNoYes
Ease of useYesYesYesNoYesYes
Other1.Manage external storage media with one click.
2.Map network drive as local drives.		1. Repair NTFS.
2.Erase NTFS volumes.
3.Reformat other file systems into NTFS.		N/AN/AMultiple languages are available.N/A
Price$29.95$19.95FreeFreeFreeFree
Free downloadDownloadDownloadDownloadDownloadDownloadDownload

Now, you have a few options in your hands. If you don't care the risks and want to try out the free NTFS for Mac programs, generally speaking, Mounty for NTFS and FUSE for macOS are better ones. However, if you care about the reliability, technical support and NTFS write speed a lot, or you are specifically looking for an NTFS driver for macOS Catalina, Mojave or High Sierra, iBoysoft NTFS for Mac is your best choice.

People also ask

Q: Is NTFS for Mac free

A: There are four NTFS for Mac free software:

Mac Ntfs For Mac

  1. Mounty for NTFS
  2. NTFS-3G
  3. FUSE for macOS
  4. SL-NTFS

Q: How can Mac read NTFS for free?

Ntfs Driver For Mac

A: By default, macOS Disk Utility can mount NTFS drive in read-only mode.

Q: What is the best NTFS for Mac?

Ntfs For Mac

A: There are three best NTFS for Mac software:

Ntfs For Mac Free Download

  1. iBoysoft NTFS for Mac
  2. Paragon NTFS for Mac
  3. Tuxera NTFS for Mac




티스토리툴바